Mini panel mounted Controller Resistivity 0.00-19.90MΩ/cm View larger

Mini panel mounted Controller Resistivity 0.00-19.90MΩ/cm

BL983314-1

New

Item no. BL983314-1

More details

233 €

Resistivity Mini Controller

Easy to handle
Fire retardant casing
Selectable overdose protection system
Splash resistant cover

BL 983314 is a simple to operate resistivity controller designed for ultra pure water, reverse osmosis, and water conditioning applications. The BL 983314 resistivity controller is also ideal for continuous monitoring of process solutions. Set point and calibration are manually adjusted with a trimmer and the alarm relay allows for simple control.

Readings are automatically temperature compensated, with three different coefficients (ß=2.4; 3.5; 4.5%/°C). The alarm contact can be used for connection to an alarm, pump, solenoid or dosing system.

The relay contact is open when readings are higher than the set point, while for measurements lower than set point, the relay contact is closed. The Hysteresis is typically 0.20 MW/cm from the set point.

Measurements are displayed on the LCD and the multicolored LED continuously indicates if the controller is in measurement, dosing or alarm mode. Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need.

The overtime control system advises users when the relay is active for too long, helping to prevent over-dosage.

Order Information:
BL 983314-1 ( 115/230V) are supplied with mounting brackets, transparent cover and instruction manual.

Accuracy ±2% F.S.
Calibration factory calibrated
Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9")
Dosing Relay 1, max 2A (fuse protected), 250 Vac, 30 Vdc contact closed when reading falls below setpoint value
Overtime adjustable, typically from 5 to approx. 30 minutes
Power Supply See Chart
Probe HI 3314
Range 0.00 to 19.90 M?/cm
Resolution 0.10 M?/cm
Setpoint adjustable from 0 to 19.90 M?/cm
Temperature Coefficient ß=2.4; 3.5; 4.5%/°C selectable through jumper on the rear panel
Temperature Compensation Automatic and linear, 5 to 50°C (41 to 122°F)
Weight See Chart

Related Products